I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-10%
TNY177PN Off-line Switcher IC
Original price was: ₹75.00.₹65.00Current price is: ₹65.00. inc. GST
CD4066 Quad Single-Pole Single-Throw Analog Switch IC
Original price was: ₹25.00.₹15.00Current price is: ₹15.00. inc. GST
A6259 Fly Back Switching Regulator IC
Original price was: ₹100.00.₹90.00Current price is: ₹90.00. inc. GST
- Universal-Input 13 W 100 kHz Fly back Switching Regulator
- 100 kHz PWM with ±5% frequency jittering for EMI noise filtering cost reduction
- Rugged 650 V avalanche-rated MOSFET:
-Simplified surge absorption
-No VDSS derating required
- Low RDS(on) : 6 Ω maximum
- Auto-burst mode for stand-by operation or light loads; less transformer audible noise
- Built-in leading edge blanking
- Soft start and low start-up current; start-up circuit disabled in operation
- Auto-burst stand-by (intermittent operation) input power <0.1 W at no load
- Built-in constant-voltage/constant current (CV/CC)
- Multiple protections:
–Â pulse-by-pulse overcurrent protection (OCP)
–Â Overload protection (OLP) with auto restart
– Latching overvoltage protection (OVP)
-Under voltage lockout (UVLO) with hysteresis
– Latching thermal shutdown (TSD)
- Operation Start Voltage 15.7V
- Startup Current 1.43mA
Description
The STR-A6259H designed as 100 kHz PWM topology (with ±5% frequency jittering for minimum EMI) regulator designed explicitly to satisfy the requirements for increased integration and reliability Package DIP-8 in flyback converters. This switching regulator IC consists of primary control and drive circuit with an avalanche-rated power MOSFET. This regulator IC covers a power range from below 17 watts for an Approximate Scale 1:1 230 VAC input. Or to 13 watts for a universal (85 to 264 VAC) input. Moreover, this device offers a wide range of applications, from DVD players and VCR player/recorders to ac adapters for cellular phones and digital cameras.
Meanwhile, an auto-burst standby function reduces power consumption at light load, while multiple protections, including the avalanche-energy guaranteed MOSFET. As a result, provide high reliability of system design. Moreover, this regulator IC features cycle-by-cycle current limiting, under-voltage lockout with hysteresis. And also overvoltage protection, and thermal shutdown to protect the power supply during the normal overload and fault conditions. This Overvoltage protection and thermal shutdown are latched after a short delay. The latch resets by cycling the input supply.
In addition to it, the Low start-up current and a low-power standby mode selected from the secondary circuit complete a comprehensive suite of features. A6259 Fly Back Switching Regulator IC manufactured in a 8-pin mini-DIP plastic package with pin 6 removed. The lead frame plating is pure Sb, and the package complies with RoHS.
Reviews (0)
Shipping & Delivery
Related products
ADXL 335 Accelerometer IC
- 3-axis sensing
- Small, low profile package
- 4 mm × 4 mm × 1.45 mm LFCSP
- Low power : 350 μA (typical)
- Single-supply operation: 1.8 V to 3.6 V
- 10,000 g shock survival
- Excellent temperature stability
- BW adjustment with a single capacitor per axis
- RoHS/WEEE lead-free compliant
- 8V- 3.6V single-supply operation
- Integrated X, Y, and Z axis accelerometer on a single chip
- X and Y axis has a 0.5Hz to 1600Hz bandwidth
- Z axis has a 0.5Hz to 550Hz bandwidth
- Hermetically sealed for temp and humidity resistance
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
GSM Antenna Dlenp 2dbi/3dbi Patch Antenna with SMA Male Connector
- GSM Antenna
- Gain: 2 to 3dbi
- Wire Length: 3 metre
- 3dbi Sticker Antenna
- GSM Antenna
- SMA Male Connector
- Frequency Range(MHz): 824-960/1710-1990Mhz
- Bandwidth (MHz): 136/280
- VSWR≤1.5
- Gain(dB): 2-3dbi
- Max Input power(W): 60W
- Input Impedance: 50 Ω
- Polarization Type: Vertical
- Cable Type: RG174
- Mounting Adhesive
- Net weight: 47g
HX711–24 Bit Analog to Digital Converter (ADC)
- It is an ADC converter with two differential input channels
- An active-low noise PGA is integrated inside the chip which provides the gain of 32, 64 and 128
- It has a power-on-reset capability which simplifies digital interface initialization.
- All controls to the IC are made through the pins. Programming is not needed.
- You can select a data rate of 10SPS or 80SPS at the output.
- Provides simultaneous supply rejection of 50Hz and 60Hz supply.
- Built-in analog power supply regulator
- The voltage supply range is from 2.6V to 5.5V
- The temperature range is from -40 °C to +85℃
Solid State Relay Module DC To AC SSR-40DA 3-32VDC/24-380VAC 40A
- Control mode: DC-AC
- Input voltage: 3-32V DC.
- Output voltage: 24-380V AC.
- Output current: 40A.
- Working voltage: 250V.
- Material: plastic + metal.
- Loading current: 40A
- Control current: 3-25mA DC
- On voltage: ≤1.5V AC
- One-off Time: ≤10ms
- Off Leakage Current: ≤2mA
- Dielectrics voltage-resistance: 2500VAC
- Environment temperature: -30 to +75
- Long service life and high reliability.
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
Reviews
There are no reviews yet.