I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-7%
100KOhm ¼ Watt Carbon Film Resistor
Original price was: ₹11.00.₹10.00Current price is: ₹10.00. inc. GST
PIC16F84A Microcontroller IC
Original price was: ₹300.00.₹260.00Current price is: ₹260.00. inc. GST
PIC12F508 Microcontroller IC
Original price was: ₹75.00.₹70.00Current price is: ₹70.00. inc. GST
- Maximum CPU Frequency: 4 MHz
- Architecture: 8 bit
- Program Memory (Flash): 0.75kb
- RAM: 25 byte
- Internal Oscillator: 4 MHz
- of Pins: 8
- Voltage: 2V – 5.5V
- 4 MHz Precision Internal Oscillator: – Factory calibrated to ±1%
- In-Circuit Serial Programming™ (ICSP™) •
- In-Circuit Debugging (ICD) Support
- Power-On Reset (POR)
- Device Reset Timer (DRT) •
- Watchdog Timer (WDT) with Dedicated On-Chip RC Oscillator for Reliable Operation
- Programmable Code Protection
- Multiplexed MCLR Input Pin
- Internal Weak Pull-Ups on I/O Pins
- Power-Saving Sleep mode
- Wake-Wp from Sleep on Pin Change
- Selectable Oscillator Options:
– INTRC: 4 MHz precision Internal oscillator
– EXTRC: External low-cost RC oscillator
– XT: Standard crystal/resonator
– HS: High-speed crystal/resonator (PIC16F505 only)
– LP: Power-saving, low-frequency crystal
– EC: High-speed external clock input (PIC16F505 only)
LOW POWER FEATURES/CMOS TECHNOLOGY
- Operating Current: – < 175 μA @ 2V, 4 MHz, typical
- Standby Current: – 100 nA @ 2V, typical
- Low-Power, High-Speed Flash Technology: – 100,000 Flash endurance – > 40 year retention
- Fully Static Design
- Wide Operating Voltage Range: 2.0V to 5.5V
- Wide Temperature Range:
​              – Industrial: -40°C to +85°C
– Extended: -40°C to +125°C
Description
The PIC12F508 designed based on the Microchip Technology. These are low-cost, high-performance, 8-bit, fully static, with Flash-based CMOS microcontrollers. These microcontrollers employ a RISC architecture with only 33 single-word/single-cycle instructions. All instructions in this microcontroller exist in single cycle (200 µs) except for program branches, which also take two cycles. The PIC12F508 microcontroller devices provide better performance in an order of magnitude higher than their competitors in the same price category. Meanwhile, this PIC microcontroller comes with 12-bit wide instructions that are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit microcontrollers in its class. PIC12F508 is quite easy-to-use and also easy to remember instruction set reduces development time significantly.
This CMOS Microcontroller unit consists of 8 pins out of which 6 pins used as I/O pins. Moreover, it has Power-on-Reset (POR) as well as the Device Reset Timer (DRT) that eliminates the need for external Reset circuitry. In addition, it consists of an internal oscillator with 4Mhz frequency and can be configured in Power saving oscillator mode.
PIN DESCRIPTION
- VDD: Positive Pin of MCU (+5V)
- GP5/OSC1/CLKIN: Bidirectional I/O Pin or Crystal Input or External clock source input
- GP4/OSC2: Bidirectional I/O Pin, or Crystal output.
- GP3/MCLR/VPP: Input Pin or connected with a programmer, mostly with PicKit
- GP2/T0CKI: Bidirectional I/O Pin, Clock Input to Timer 0.
- GP1/CSPCLK: Bidirectional I/O Pin, or In-Circuit Programmer Clock Pin.
- GP0/ICSPDAT: Bidirectional I/O Pin or In-Circuit Serial Programming Data Pin, used in Programmer.
- VSS: Ground Pin of MCU
Reviews (0)
Shipping & Delivery
Related products
1/4W 5% Assorted Value Carbon Film Resistor Assortment Kit Set pack electronic diy kit
- 100% brand new and high quality.
- Fine workmanship and long service life.
- 1/4W carbon film resistor package.
- High precision and stability.
- Easy to use.
- Precision: 5%
- Error: 5%
- Values
- 10Ω, 15Ω, 22Ω, 33Ω, 47Ω, 68Ω, 100Ω, 220Ω, 330Ω, 470Ω, 1k, 1k5, 2k2, 3k3, 4k7, 5k6, 6K8, 8K2, 10K, 15K, 22K, 33K, 47K, 56K, 68K, 100K, 150K, 220K, 330K, 470K
- Package included: 150pcs
25pcs Button Switch Kit
- Relative Humidity: 95%
- Rated Voltage: 12V
- Rated Current: 50 mA
- Contact resistance: 50M Ohm Max (initial)
- The insulation resistance: 100M Ohm minDC (250V)
- The compressive strength: AC250V (50/60Hz for 1 minute)
- Mechanical life: 100000 cycles
- The environment temperature: 25° ~ + 105°
- The operating strength: 180/250 (plus or minus 30gf)
- Dimension: 12 * 12 * 7.3 round convex type
- Total Buttons: 25pcs
- Colours: 5 (Black, Red, White, Blue, Yellow)
Capacitor Touch Dimmer, Constant Voltage LED Stepless Dimming, PWM Control Board
- Voltage range: 4V to 5V
- Maximum output current: 500mA
- Hole distance: 16 mm
- Aperture: 5 mm
- The lamp brightness can be adjusted by requirement, it is very to operate.
- It can touch in medium protection, such as glass, acrylic, plastic, ceramics, and so on, which is very safe.
- Anti power and phone interference, the EFT can reach above +/-2KV; the touch response sensitivity and reliability will not be affected by the close distance or multi-angle mobile phone interference.
- Dimming mode: Non-polar PWM dimming.
- PCB size: 23 x 20mm
Dual Micro USB 3.7v to 5V 2A Power Bank DIY 18650 LiPo Charger
- 4-level LED lamp display power, not working state intelligent automatic shutdown;
- The built-in lithium battery protection IC, over-current, under-voltage protection;
- Dual USB output ports.
- Dimensions: 68 x 34 x 9 mm (LxWxH)
- Weight: 10 gm
- Input port: MicroUSB (Andro)
- Input requirements: 5V constant voltage power supply can do charge input power, the most matching charger for 5v1a above
- Output port: USB
- Output parameters: 5V1A/5V2A
- Requirements for rechargeable batteries:
- Compatible Batteries: 18650 batteries, cell phone batteries, flat-panel batteries, MP3 batteries, etc. 3.7v-4.2V polymer Lithium battery,
Reviews
There are no reviews yet.