I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
-13%
4000W 220V AC SCR Voltage Regulator Dimmer Electric Motor Speed Controller
Original price was: ₹700.00.₹650.00Current price is: ₹650.00. inc. GST
Mega R3 +WiFi ATmega2560+ESP8266 Module CH340G Compatible For Arduino Mega
Original price was: ₹2,000.00.₹1,800.00Current price is: ₹1,800.00. inc. GST
UNO R3 +WiFi ATmega328P+ESP8266 Module CH340G Compatible For Arduino Uno
Original price was: ₹1,500.00.₹1,300.00Current price is: ₹1,300.00. inc. GST
- Microcontroller: ATmega328IC
- Wi-Fi: ESP8266
- USB-TTL converter: CH340G
- Power Output: 5V-800mA
- Power input USB: 5V (500mA max.)
- Power input VIN/DC Jack: 9-24V
- Power Consumption: 5V 800mA
- Logic Level: 5V
- WiFi: 802.11 b/g/n 2.4 GHz
- USB type: Micro USB
- USB Clock Frequency: 16MHz
- Operating Supply Voltage: 5V
- Digital I/O Pins: 14
- Analog I/O pins: 6
- Memory Size: 32Mb
- Interface Type: serial
- Operating temperature: −40С°/+125С°
- Dimensions (L×W)mm: 53.34×68.58
Description
This UNO R3 +WiFi ATmega328P+ESP8266 Module CH340G is defined as a modernized version programmable board compatible with the Arduino UNO board. This module with fully integrated microcontroller ATmega328 and a Wi-Fi chip ESP8266 with 32 MB memory on one board. All modules in this board can either work together or individually. And everyone has their own pinout headers.
This module is an ideal solution for developing new projects that require Uno and WiFi. We can update sketches and firmware for ATmega328 and for ESP8266 Via USB. Â The onboard CH340G functions as the USB serial converter. It is a modernized version of the classic Arduino UNO R3 board Uno R3 ATmega 328 and WiFi ESP8266 features 8Mb (MegaByte) memory. The DIP switch present on the board switches the modes of interaction of microcontrollers. Hence each of the microcontrollers has led to connecting peripheral sensors and modules.
This board is quite simple to operate and install. The board has a DIP switch, to connect the modules. For example, to USB and ATmega328, USB and ESP8266, ATmega328 and ESP8266. The CH340 board based on  ESP8266 was designed as an integrated chip specifically to fulfil the needs of a new connected world. It consists of all-in-one microcontroller + WiFi platforms widely used with WiFi for IoT applications.
The Arduino Uno board was designed as an open-source microcontroller board based on the Microchip ATmega328P microcontroller and developed by Arduino. cc. The board consists of sets of 14 digital and 6 analogue input/output pins. Thus can be interfaced to various expansion boards and other circuits. Moreover, this Arduino Uno compatible board operates at a supply voltage of 5V at a current of 800mA.
Reviews (0)
Shipping & Delivery
Related products
2.4″ Inch Touch Screen TFT Display Shield for Arduino
- 4″ Touch LCD TFT display module for Arduino
- 240*320 pixels resolution
- Ability to display 262000 different colours
- The shield comes equipped with a microSD card slot.
- SPFD5408 controller with built-in video RAM buffer
- 8-bit digital interface, plus 4 control lines
- 5V compatible. Use with 3.3V or 5V logic
- On-board 3.3V 300mA LDO regulator
- Uses digital pins 5-13 and analogue 0-3. That means you can use digital pins 2, 3, and analog 4 and 5. Pin 12 is available if not using the microSD
- Works with any Arduino Uno and mega compatible boards
- Resolution: 240320 pixels
- Supply voltage: 5V
- Working temperature: -30C ~ 70C
- Dimension: 72*52*12mm
37 IN 1 Sensor Kit For Arduino
- For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Infrared sensor receiving module
- Laser sensor module
- Temperature and humidity sensor module
- Infrared sensor module
- 5v relay module
- Obstacle avoidance sensor module. For beginners who are interested in Arduino
- A complete set of Arduino’s most common and useful electronic components
- Packaging Type: Box
- Material: Circuit board
- Dimensions: 98Â x 0.59 x 0.24 inch
- Weight: 428 g
Arduino Leonardo R3
- Board Mode: LEONARDO R3
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Input Voltage (Recommended): 7-12V
- Input Voltage (limits): 6-20V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
- DC Current per I/O Pin: 40 mA
- DC Current for 3.3V Pin: 50 mA
- Flash Memory: 32 KB
- SRAM: 2.5 KB (ATmega32u4)
- EEPROM: 1 KB (ATmega32u4)
- Clock Speed: 16 MHz
L293D Motor Driver Shield
- L293D motor driver chip & 74HC595 shift register
- Four H-bridges
- Terminal blocks and jumper to connect external power, for separate logic/motor supplies
- Up to 4 bi-directional DC motors with individual 8-bit speed selection
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil or interleaved stepping.
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 25VDC.
- Pull-down resistors keep motors disabled during power-up
- Big terminal block connectors to easily hook up wires (18-26AWG) and power
- Arduino reset button brought up top
- Tested compatible with Arduino Mega 1280 & 2560, Diecimila, Duemilanove, and UNO
- PCB Size: 69 x 53 mm
SD Card shield V4.0 for Arduino UNO
- Standard SD card, SDHC card and TF card compatible
- 3.3v and 5v logical voltage compatible
- 2.6-3.6v DC power supply
- UART Grove & I2C connection compatible
- Fully supported SD Library
- Minimal number of SPI port
- Jumpers provided for configuring Arduino SPI port pins
- Onboard toggle switch for SD card select type
- Truly stackable
- Prototype expand Library support
- Size: 53mm x 47mm
- Weight: 35g
Reviews
There are no reviews yet.