TOP244YN Off-line Switcher IC
LM3886 68W Audio Power Amplifier IC
- High-Performance 68W Audio Power Amplifier with Mute
- 68W cont. avg. output power into 4Ω at VCC = ±28V
- 38W cont. avg. output power into 8Ω at VCC = ±28V
- 50W cont. avg. output power into 8Ω at VCC = ±35V
- 135W instantaneous peak output power capability
- Signal-to-Noise Ratio ≥ 92dB
- An input mute function
- Output protection from a short to ground or to the supplies via internal current limiting circuitry
- Output over-voltage protection against transients from inductive loads
- Wide supply range 20V - 94V
- 11-lead TO-220 package
LM2576 3Amp Step-Down Voltage Regulator IC
- Switch mode step down voltage regulator
- Output Voltage for fixed voltage regulator: 3.3V, 5V, 12V or 15V
- Output Voltage for Variable type regulator: 1.23V to 37V
- Output Current: Upto 3A
- Maximum Input Voltage: 40V
- In-built Thermal Shutdown and Current Limit Protection
- Internal Oscillator: 52-kHz (Fixed Frequency)
- Available in TO-220 and TO-263 packages
- Adjustable output, reference voltage ±2% max over line and load conditions
- Requires only 6 external components
TOP246Y Off-line Switcher IC
TNY276PN Off-line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 720mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 16Ω
- Simple ON/OFF control, no loop compensation needed
- ON-time extension – extends low line regulation range/hold-up time to reduce input bulk capacitance
- Frequency jittering reduces EMI filter costs
- Pin-out simplifies heat sinking to the PCB
- SOURCE pins are electrically quiet for low EMI
- Package: DIP-8B
LM1207N RGB Video Amplifier IC
- Supply Voltage (VCC) 10.8V s VCC s 13.2V
- Supply Voltage (VCC) 15V
- Peak Video Output Source Current 28 mA
- Power Dissipation (PD) 2.5W
- Temperature Range b20 degree C to 80 degree C
- RGB Video Amplifier System with Blanking
- Matched (±0.1 dB or 1.2%) attenuators for contrast control
- Three externally gated single ended input comparators for cutoff and brightness control
- 0V to 4V, high input impedance DC contrast control (>40 dB range)
- 0V to 4V, high input impedance DC drive control for each video amplifier (-6 dB to 0 dB range)
- Spot killer, blanks output when VCC <10.6V
- Capable of 7 VPP output swing (slight reduction in bandwidth)
- Output stage blanking
- Output stage directly drives most hybrid or discrete CRT drivers
74LS241 Octal Buffer and Line Driver IC With 3-State Outputs
- Octal Buffer and Line Driver With 3-State Outputs
- Logic Family: LS
- Logic Type: Bipolar
- Polarity: Non-Inverting
- High Level Output Current: -15 mA
- Low Level Output Current: 24 mA
- Number of Channels per Chip: 8
- Propagation Delay Time: 18 ns at 5 V
- No. of Pins: 20
- Operating Temperature Range: 0°C to +70°C
- Supply Voltage Range: 4.75V to 5.25V
- Package: DIP-20
74LS221 Dual Monostable Multivibrator IC with Schmitt-Trigger Inputs
CD4015BE CMOS Dual 4-Stage Static Shift Register IC
74LS47 BCD to Seven Segment Decoder Driver IC
74LS75 4-Bit Bistable Latch IC
- 4-Bit Bistable Latche
- High-level input voltage: 2V
- Low-level input voltage: 0.8V
- High-level output current: -400µA
- Low-level output current: 8mA
- No. of Circuits: 2
- No. of Inputs: 4
- No. of Outputs: 4
- Input clamp voltage: -1.5V
- Propagation delay time: 30ns
- Supply voltage range: 4.75 to 5.25V
- Package: DIP-16