CD4060 14 Stage Ripple Carry Binary Counter or Divider and Oscillator IC
- 14 Stage Ripple Carry Binary Counter or Divider and Oscillator
- Supply Voltage Range:Â 3 to 20V
- Input Current: ±10mA
- Power Dissipation:Â 200mW
- Low level Output Voltage:Â 0.05V
- High level Output Voltage Min.:Â 4.95V
- Low level Input Voltage Max.:Â 1.5V
- High level Input Voltage Min.:Â 3.5V
- Maximum Clock Frequency:Â 24MHz
- Propagation Delay Time Max.:Â 740ns
- Package:Â DIP-16
LM1267 RGB Video Amplifier IC
- 150 MHz I2C Compatible RGB Video Amplifier System with OSD and DACs
- Programmable 110 MHz to 150 MHz bandwidth preamplifier with full video signal parametric control
- 4 external 8-bit DACs for bus controlled Bias and Brightness
- Suitable for use with discrete or integrated clamp, with software configurable Brightness mixer
- Power Save (Green) Mode, 80% power reduction
- Matched to LM246X driver
- Temperature Range 0ËšC to 70ËšC
- Supply Voltage (VCC) 4.75V < VCC < 5.25V
- Video Inputs 0.0V < VIN < 1.0VP-P
- Thermal Resistance to Case (θJC) 32˚C/W
- Junction Temperature (TJ) 150ËšC ESD Susceptibility (Note 4) 3.5 kV
- ESD Machine Model (Note 5) 350V
- Storage Temperature −65˚C to +150˚C
- Lead Temperature (Soldering, 10 sec.) 265ËšC
- Thermal Resistance to Ambient (θJA) 51˚C/W
89S51 Atmel Microcontroller IC
- Core Processor: 8051
- Data Bus Width: 8 bit
- Maximum Clock Frequency: 33 MHz
- Program Memory Size: 4 KB
- Program Memory Type: Flash
- RAM Size: 128 B
- ADC: No
- Number of Programmable I/Os: 32
- Number of Timers: 2
- Supply Voltage Range: 4 V to 5.5 V
- Package: PDIP
- 4K Bytes of In-System Programmable (ISP) Flash Memory – Endurance: 1000 Write/Erase Cycles
- 0V to 5.5V Operating Range
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 128 x 8-bit Internal RAM
- 32 Programmable I/O Lines
- Two 16-bit Timer/Counters
- Six Interrupt Sources
- Full Duplex UART Serial Channel
- Low-power Idle and Power-down Modes
- Interrupt Recovery from Power-down Mode
- Watchdog Timer
- Dual Data Pointer
- Power-off Flag
- Fast Programming Time
- Flexible ISP Programming (Byte and Page Mode
IC PT2262
TOP245YN Off-line Switcher IC
TOP204Y Off-line PWM Switch IC
- Supply Current: 1.4 mA
- Supply Voltage: 85-265VAC
- Output Voltage: 5.8 V
- Power (Watts): 50W
- Switching Frequency-Max:Â 100 kHz
- Package: TO-220
-  Built-in start-up and current limit reduce DC losses • Low capacitance 700 V MOSFET cuts AC losses • CMOS controller/gate driver consumes only 6 mW
- 70% maximum duty cycle minimizes conduction losses.
- Low Cost Replacement for Discrete Switchers.
- Easily interfaces with both opto and primary feedback .
- Supports continuous or discontinuous mode of operation
TOP223Y Offline PWM Switcher IC
- Supply Current: 1.2 mA
- Supply Voltage: 85-265VAC
- Output Voltage: 5.7 V
- Power (Watts): 50W
- Switching Frequency: 100 kHz
- Lowest cost, lowest component count switcher solution
- Cost competitive with linears above 5 W
-  Very low AC/DC losses – up to 90% efficiency
- Â Built-in Auto-restart and Current limiting
- Â Latching Thermal shutdown for system level protection
- Implements Flyback, Forward, Boost or Buck topology
- Â Works with primary or opto feedback
- Â Stable in discontinuous or continuous conduction mode
- Â Source connected tab for low EMI
- Â Circuit simplicity and Design Tools reduce time to market
- Package: TO-220
CD4055BE CMOS Liquid Crystal Display Driver IC
- CMOS Liquid Crystal Display Driver
- Number of Digits:Â 1
- Number of Segments:Â 7
- Maximum Power Dissipation:Â 500 mW
- Maximum Supply Current:Â 100 uA
- Output Current Max:Â 5.8mA
- No. of Outputs:Â 7
- No. of Pins:Â 16
- Logic IC Family:Â CD4000
- Logic IC Function:Â BCD To 7 Segment Decoder / Driver with Display Frequency Output
- Operating Temperature Range: -55°C to +125°C
- Supply Voltage Range:Â 3V to 18V
- Package:Â PDIP-16
DS1307 64 X 8 Serial Real Time Clock IC
74LS395 4 Bit Cascadable Shift Register IC
- 4 Bit Cascadable Shift Register With 3 State Outputs
- Supply Voltage Range:Â 4.75V to 5.25V
- Supply Current Max.:Â 31mA
- Clock Frequency Max.:Â 45MHz
- HIGH Level Input Voltage Min.:Â 2V
- LOW Level Input Voltage Max.:Â 0.8V
- HIGH Level Output Voltage Min.:Â 2.4V
- LOW Level Output Voltage Max.:Â 0.4V
- High level Output Current Max.:Â -2.6mA
- Low level Output Current Max.:Â 24mA
- Input Clamp Voltage Max.:Â -1.5V
- Propagation Delay Time Max.:Â 35ns
- Package:Â DIP-16
