LM3915 Dot or Bar Display Driver IC
- Dot/Bar Display Driver
- 3 dB/step, 30 dB range
- Drives LEDs, LCDs, or vacuum fluorescents
- Bar or dot display mode externally selectable by user
- Expandable to displays of 90 dB
- Internal voltage reference from 1.2V to 12V
- Operates with single supply of 3V to 25V
- Inputs operate down to ground
- Output current programmable from 1 mA to 30 mA
- Input withstands ±35V without damage or false outputs
- Outputs are current regulated, open collectors
- Directly drives TTL or CMOS
- The internal 10-step divider is floating and can be referenced to a wide range of voltages
PIC18F458 Microcontroller IC
- Maximum CPU Frequency: 40 MHz
- Architecture: 8 bit
- Program Memory (Flash): 32 kB
- RAM: 1536 byte
- Internal Oscillator: No
- ADC: 1 (8 channels)
- of Pins: 40
- Voltage: 2V - 5.5V
- Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Watchdog Timer (WDT) with its own on-chip RC oscillator
- Programmable code protection
- Power-saving Sleep mode
- Selectable oscillator options, including:
- In-Circuit Serial ProgrammingTM (ICSPTM) via two pins
- Low-power, high-speed Enhanced Flash technology
- Fully static design
- Wide operating voltage range (2.0V to 5.5V)
- Industrial and Extended temperature ranges
PIC16F676 Microcontroller IC
- 128 bytes of EEPROM Data Memory
- Programmable pull-up resistors
- Individually select able analog channels
- ICD2 programming support or debugging support with optional header adapter
- 8 oscillator sellections including precision 4 MHz RC oscillator with programmable calibration and Power-on Reset
- Program Memory Type:Flash
- Program Memory (KB):1.75
- CPU Speed (MIPS):5
- RAM Bytes:64
- Data EEPROM (bytes):128
- Digital Communication Peripherals:1-UART,
- Timers:1 x 8-bit, 1 x 16-bit
- ADC:8 ch, 10-bit
- Comparators:1
- Temperature Range (C):-40 to 125
- Operating Voltage Range (V):2 to 5.5
- Pin Count:14
- Cap Touch Channels:8
TNY280PN Off-Line Switcher IC
- Drain Voltage: -0.3 to 700V
- Drain Peak Current: 1360mA
- ENABLE Voltage: -0.3 to 9V
- ENABLE Current: 100mA
- ON State Resistance (max): 3Ω
- Output Frequency Max: 140KHz
- Package: DIP-8C
- Energy Efficient Off-Line Switcher
- Simple ON/OFF control, no loop compensation needed
- ON-time extension – extends low line regulation range/hold-up time to reduce input bulk capacitance
- Frequency jittering reduces EMI filter costs
- Pin-out simplifies heat sinking to the PCB
- SOURCE pins are electrically quiet for low EMI
CD4026 CMOS Decade Counter with Decoded 7-Segment Display Outputs
Motor Driver IC – L293D
- Can be used to run Two DC motors with the same IC.
- Speed and Direction control is possible
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Maximum Continuous Motor Current: 600mA
- Supply Voltage to Vcc1(vss): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
- Featuring Unit rode L293 and L293D
- Wide Supply-Voltage Range: 4.5 V to 36 V
- Separate Input-Logic Supply
- Internal ESD Protection
- Thermal Shutdown
- High-Noise-Immunity Inputs
- Output Current 1 A Per Channel (600 mA for L293D)
- Peak Output Current 2 A Per Channel (1.2 A for L293D)
- Output Clamp Diodes for Inductive Transient Suppression
PCF8583 IC
- I2C-bus interface operating supply voltage: 2.5 V to 6 V
- Clock operating supply voltage 1.0 V to 6.0 V at 0 Cto+70C
- 240 8-bit low-voltage RAM
- Data retention voltage: 1.0 V to 6.0 V
- Operating current (at fSCL = 0 Hz): max 50 μA
- Clock function with four year calendar
- Universal timer with alarm and overflow indication
- 24 hour or 12 hour format
- 32.768 kHz or 50 Hz time base
- Serial input and output bus (I2C-bus)
- Automatic word address incrementing
- Programmable alarm, timer, and interrupt function
- Slave addresses: A1h or A3h for reading, A0h or A2h for writing
80C52 Microcontroller IC
- Internal Memory
- ROM:8K x 8-bits
- RAM:256 x 8-bits
- External Memory Addressing
- Up to 64K Program Memory Space
- Up to 64K Data Memory Space
- Timer
- Two 16-bit Timer/Counters
- Interrupt Source
- Six Interrupt Sources
- Two-Level Interrupt priority
- Boolean Processor(Single-bit Logic)
- Full Duplex UART
- I/O ports
- Four 8-bit Ports
- Two Types of Power Saving Mode
- Idle Mode
- Power Down Mode
- Operating Volage:5V
- Operating Frequency:12MHz
- Package Type
- 40-pin PDIP
- Programmable clock out
- Asynchronous port reset
- Low EMI (inhibit ALE and slew rate controlled outputs)
- Wake-up from Power Down by an external interrupt
- CMOS and TTL compatible
- 4 level priority interrupt
- Memory addressing capability – 64k ROM and 64k RAM
74F244 Octal Buffer or Driver IC With 3-State Output
- Octal Buffer/Driver With 3-State Output
- Logic Family: F
- Logic Type: Bipolar
- No. of Channels per Chip: 8
- Polarity: Non-Inverting
- Propagation Delay Time: 5.2 ns at 5 V
- High Level Output Current: -15 mA
- Low Level Output Current: 64 mA
- No. of Pins: 20
- Operating Temperature Range: 0°C to +70°C
- Supply Voltage Range: 4.5V to 5.5V
- Package: DIP-20
5H0165 Offline Power Switch IC
- Offline power switch with minimal external components
- Drain Voltage: 650V
- Drain Current: 4A
- Supply Voltage: 30V
- Supply Current: 12mA
- Precision fixed operating frequency (100/67/50kHz)
- Low start-up current (typ. 100µA)
- Pulse by pulse current limiting
- Over-current protection
- Overvoltage protection (Min. 25V)
- Internal thermal shutdown function
- Under voltage lockout
- Internal high voltage sense FET
- Auto-restart mode
74LS322 8-Bit Shift Register IC
- 8-Bit Shift Registers with Sign Extend
- High-level output voltage: 3.4V
- Low-level output voltage Max. : 0.5V
- High-level Output current: -0.4mA
- Low-level Output current: 8mA
- Input clamp voltage: -1.5V
- Maximum clock frequency: 35MHz
- Supply voltage range: 4.75 to 5.25V
- Multiplexed Input/Outputs for Data Hold, Shift Right, Shift Left, and Load Data
- Multiplexed Inputs/Outputs to provide Improved Bit Density
- Sign Extend Function
- Direct Overriding Clear
- 3-State Outputs Drive Bus Lines Directly
- Package: DIP-20
74LS295 4-Bit Right-Shift Left-Shift Register IC
- 4-Bit Right-Shift Left-Shift Register with 3-State Outputs
- High-level input voltage: 2V
- Low-level input voltage: 0.8V
- High-level output voltage: 3.1V
- Low-level output voltage: 0.25V
- Input clamp voltage: -1.5V
- Maximum clock frequency: 45MHz
- Propagation delay time max: 30ns
- Supply voltage range: 4.75 to 5.25V
- Package: DIP-14