3V To 5V 1A USB Charger Step Up Boost Module
- Module properties: Non-isolated step-up module (BOOST).
- Input voltage: 2.5-6V.
- Output voltage: 4-12 V (Adjustable (need to replacing the resistance to adjustable), the default 5 v).
- Output current: 1000mA (Max).
- Efficiency: 92% (Max) (the higher the input voltage, the higher the efficiency).
- Switching frequency: 1MHz.
- Output ripple: 20mV (MAX).
- Operating temperature: Industrial (-40°c to +85°c).
- Voltage regulation: ±2.5%.
- Short circuit protection: None
- Input: IN + postive, IN - negative.
- Output: USB output.
- Dimension: 3 x 1.3 x 0.8cm.
Dc 4.5V-40V to 5V 2A USB Charger DC-DC Step-Down Buck Converter Voltmeter
- Input voltage: DC 4.5 ~ 40V.
- Output voltage: 5V (when the input voltage is between 6.5V ~ 40V).
- Output current: 2A.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- The voltmeter has an automatic calibration function.
- With reverse connection protection.
- With overheat protection and short circuit protection.
- High efficiency and low ripple.
- With USB power indicator light.
30W LM2587 Step-Up Voltage Module
- Input Voltage Range : 3.5V to 30V
- Output Voltage Range: 4V to 30V
- Input Maximum Current : 5A
- Power : 30W
- Efficiency : 92%
- Operating temperature: -40 ℃ – 85 ℃
- Load capacity: 80W (MAX)
- Mode of connection: Wiring terminals are free of soldering, IN is input, OUT is output.
- Suitable for 24V car or laptop power supply.
- Low ripples.
- High power.
- Module size: 37mm x 32mm x 15mm (L x W x H)
- Net weight: 31g
Hi-link HLK-5M12 100-240 VAC to 5 VDC/5W Power Supply Module
- Meet UL, CE requirements,
- Rated input voltage: 100-240 VAC
- Input voltage range: 90-264 VAc
- Maximum input current: 2 A
- Input current surge: 10 A
- Maximum input voltage: 270 VAc
- Enter slow start: 50 mS
- Input Low Voltage Efficiency: Vin=110VAc,Output full-load?69 %
- Input High Voltage Efficiency: Vin=220VAc,output full-load?70 %
- Load rated output voltage: +12±0.1 VDc
- Full rated output voltage: 12±0.2 VDc
- Short-term maximum output current ?540mA
- The maximum output current for a long time: 450 mA
- Voltage Regulation ±0.2 %
- Load Regulation ±0.5 %
- Ultra-thin, ultra-small
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- Low power consumption, environmental protection, no-load loss <0.1W
- Output over-current protection 150-200% of the output maximum load A
- Product designed to meet the requirements of EMC and Safety Test
XL4015 5A STEP DOWN WITH DISPLAY
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree to + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- LED to indicate power status
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
XL4015 5A STEP DOWN MODULE
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 ~ + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator: No
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
Mini 360 STEP DOWN BUCK CONVERTER POWER MODULE
- MPS MP2307DN buck regulator IC
- Design Non-isolated buck
- Rectification: synchronous rectification
- Input voltage: 4.75V-23V
- Output voltage: 1.0V-17V
- Output current Peak: 3A, continuous 1.8A
- Conversion efficiency: 96%
- Switching frequency: 340KHz
- Built-in 160°C thermal shutdown
- Output ripple: 30mV (no load)
- Load regulation: ± 0.5%
- Voltage regulation: ± 2.5%
- Operating temperature: -40 ° C to + 85 ° C
- Dimensions: 17 * 11 * 3.8mm
MP1584EN MINI 3A DC-DC CONVERTOR
- Input voltage: 4.5V-28V
- Output voltage: 0.8V-20V
- Output current: rated 3A maximum
- Switching frequency: 1MHz
- Output ripple: less than 30mV
- Efficiency: 96%
- Operating temperature: -40 degree to 85 degree Celsius
- Accuracy: +/-0.5%
- Internal soft-start
- Ceramic capacitor stable
- Internally set current limit without current sensing resistor
- Dimension:22*17*4mm
LM317 DC-DC STEP DOWN CONVERTOR
- Output current: 1.5A(min), 2.2A(typical)
- I/O voltage differential (v1-v0): 40V DC
- Adjustable output voltage range: 1.2V-37V
- Voltage input: 4.2V-40V
- Switching frequency: 100 MHz
- 80 db ripple rejection
- Input method: VIN input is positive, GND input negative
- Output method: VOUT output positive, GND output negative
- Operating temperature: 0 degrees to 125 degree Celsius
- Dimension: 35.6*16.8mm
DC –DC 600W 10-60V TO 12-80V BOOST CONVERTOR STEP UP MODULE POWER
- Input voltage: 12v-60v
- Output voltage: 12v-80v (adjustable)
- Input current: maximum input current 15A
- Output current: maximum output current 10A
- Output power: effective power input voltage*10A
- 600-watt high power booster module
- Operating frequency: 15KHz
- Overcurrent protection
- Minimum voltage difference: 2v
- Ultra-low dropout voltage
- Conversion efficiency: 95%
- Short circuit protection
- dimension:76*60*56mm
- weight: 250 gm
ADJUSTABLE POWER MODULE 12A 24V BUCK TURN 12V LED DRIVER WITH CURRENT CHARGING INDICATOR
- Input voltage: 7V to 32V
- Output voltage: 0.8V to28 V (continuously adjustable)
- Output current: 12A
- Constant current range: 0.2-12A
- Conversion efficiency: up to 95%
- Operating frequency: 300KHz
- No load current: 20 milli ampere(24V to 12V)
- Dynamic response speed: 5% 200us
- Operating temperature: -40 degree to +85 degree Celsius
- Load regulation: +/- 1% (constant pressure)
- Voltage regulation: +/-1%
- Output ripple: 20M bandwidth
- Power module: QS-2405CCBD
- Two led indicators, light red indicates charging and light green indicates fully charged
- Used in-car power supply, battery charging, low voltage systems etc.
- Short circuit protection
- Dimension: 65*47* 23.5mm
5V USB OUTPUT CONVERTOR 7V-24V TO 5V/3A, DC-DC STEP DOWN BUCK KIS3R33S MODULE
- Module nature: non isolated buck
- Input voltage: 7V-24V DC
- Output voltage: 5V DC
- Output current: 4A
- Conversion efficiency:96% (max)
- Switching frequency: 340KHz
- Output ripple:30mv (max)
- Load regulation: +/-0.5%
- Voltage regulation: +/-2.5%
- Operating temperature: -40 degree to +85 degree Celsius
- Rectification: nonsynchronous rectification
- Short circuit protection
- Dimensions:60*21*14mm
- Weight: 150gm