Showing 1–12 of 32 results

DC 3.7V 7mm x 16mm Magnetic Micro Coreless Motor + Propeller

₹150.00 inc. GST
  • Body Size: 7x16mm.
  • Shaft Size: 0.8 x 5mm.
  • Propeller Size 4.5 x 0.8cm
  • Rated Voltage: 3.7 V.
  • Current: 0.1 A.
  • Max Speed: 50000 RPM.
  • Wire Length:  5cm/3".
  • Main Color: Silver Tone.
  • Main Material: Metal

QAV250 Quad-copter Frame

₹799.00 inc. GST
  • Item name: QAV250 Frame Kit
  • Arm plate thickness: 3mm
  • Main material: 3k carbon fibre
  • Wheelbase: 250mm
  • The arm equips dampers for a safe landing.
  • The arm has multiple motor mounting holes.
  • Equips vibration-free mounting bracket for FPV camera.
  • Recommend Propeller: 5 inch
  • Recommend Motor: 1806 2204 2206
  • Recommend ESC: 8A-12A
  • Recommend Battery: 1300Mah-2200Mah

Flysky CT6B 6 Channel

₹4,000.00 inc. GST
  • Channels: 6 Channels
  • Operating Voltage: 12V DC (1.5AA x 8 Battery).
  • Model type: Heli, Airplane, Glider
  • RF Power: Less than 20db
  • Modulation: GFSK
  • Code Type: 2.4Ghz No Interference
  • Sensitivity: 1024.
  • Bandwidth: 500 kHz.
  • Default Operating Mode: Mode 2 (Left-Hand Throttle).
  • Low Voltage Warning: LED
  • We can programme by PC with the included software.
  • Super active and passive anti-jamming capabilities.
  • Very low power consumption.
  • 4 Types (Airplane, Heli90, Heli120, Heli140).
  • DSC Port: Yes
  • Charger Port: Yes
  • ANT length: 26mm
  • Certificate: CE FCC
  • Dimension: 190*80*240mm
  • Weight: 680g
 

Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot

₹12,000.00 inc. GST
  • The advanced 32-bit ARM CortexM4 high-performance processors; can run NuttX RTOS real-time operating system.
  • 14 PWM / servo output.
  • Bus interface (UART, I2C, SPI, CAN).
  • The integrated backup power and backup controller fails; the primary controller fails over to the backup control is safe.
  • Provide automatic and manual modes.
  • Provide redundant power input and failover.
  • Multicolor LED lights.
  • Provide a multi-tone buzzer Interface.
  • Micro SD card to record flight data.
Processor:
  • 32bit STM32F427 Cortex M4 core with FPU.
  • 32-bit STM32F103 failsafe co-processor.
  • 168 MHz.
  • 128 KB RAM.
  • 2 MB Flash.
Sensors:
  • ST Micro L3GD20H 16 bit gyroscope.
  • ST Micro X4HBA 303H 14-bit accelerometer/magnetometer.
  • Invensense MPU 6000 3-axis accelerometer/gyroscope.
  • MEAS MS5607 barometer.
Interfaces:
  • 5* UART, 1*compatible high voltage, 2*hardware flow control
  • 2*CAN
  • Spektrum DSM/DSM2/DSM-X satellite receiver compatible input
  • Futaba SBUS compatible input and output
  • PPM signal input
  • RSSI (PWM or voltage) input
  • I2C
  • SPI
  • 3.3 and 6.6VADC
  • input External USB MICRO interface
  • Color:Black
  • Size: 50x81x16mm

Blade Propeller for 8520 8.5x20mm

₹150.00 inc. GST
  • Length: 8.5″.
  • Pitch: 20″.
  • Diameter: 55mm
  • Centre hole diameter: 0.97mm
  • Colour : Black & Red
  • suitable for 90mm-150mm DIY Micro Quadcopter Frame Kits
  • Suitable for 1mm shaft diameter Coreless motor 7*16mm, 7*20mm, 8.5*20mm
  • Suitable for 1mm shaft diameter Carbon Brush motor N20, M20, N30
  • Quick to release, quick to attach
  • New design propellers, with greater aerodynamic efficiency, good lifting capacity.

Anti-Vibration Shock Absorber for APM/KK/MWC/PixHawk

  • Colour: Black
  • Material: Glass Fibre
  • Upper Frame size:90x60x2mm
  • Lower Frame Size: 100x70x2mm
  • Shock absorber Height: 10×12mm
  • Light Weight.
  • Vibration Resistant with included Shock absorbers.
  • Shock Absorber material: Synthetic Rubber.
  • Universal Fiber Mount Shock Absorber Plate for flight controllers
  • Compact design
  • Super lightweight
  • Mounting holes on the bottom makes it easy to install
  • Suit for different open-source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4
  • Weight: 2gm

DC 3.7V Coreless Motor + Propeller 7×20

₹150.00 inc. GST
  • Body Size: 7x20mm.
  • Shaft Size: 0.8 x 5mm.
  • Propeller Size 4.5 x 0.8cm
  • Rated Voltage: 3.7 V.
  • Current: 0.1 A.
  • Max Speed: 48000 RPM.
  • Wire Length:  5cm/3".
  • Main Color: Silver Tone.
  • Main Material: Metal

Motor for Micro FPV RC Quadcopter

₹150.00 inc. GST
  • Motor Diameter: 8.5mm
  • Motor Length: 20mm
  • Shaft Diameter: 1.0mm
  • Cable Length: 60mm
  • Weight: about 5g
  • Operating Voltage range: 3v to 3.7v DC
  • Rated Speed - 39000 RPM
  • Propeller length: 75mm
  • This coreless motor supports 1S battery.
  • Ideal for mini quadcopter projects weighing below 60 grams

EMAX BLHELI 12Amp ESC for Quadcopter / Drones

₹750.00 inc. GST
  • Based on BL Heli firmware.
  • ESC Type: Brushless.
  • Built in linear or switched BEC.
  • Constant Current: 12A
  • Burst Current: 15A
  • BEC Mode: Linear BEC : 5v / 1A
  • Lipo Cells: 2-4
  • Constant Current: 12A.
  • Support: One-shot 125 Protocol.
  • Includes low voltage protection, over heat protection, and self-check functions.
  • Separate power supply for MCU and BEC, helping eliminate magnetic interference.
  • Fully programmable by any standard programming card or directly from your transmitter.
  • Customisable throttle range.
  • Weight: 11g
  • Dimension: 42x20x8mm

Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone

₹850.00 inc. GST
  • NO DC/DC converter, hence less heating
  • FTDI cable compatible pinout
  • Standard 6-pin ISP header
  • Two LED indicators
  • ATmega328P with Arduino bootloader
  • MAX7456 monochrome on-screen display
  • Pad for an Analog or Digital PWM RSSI signal
  • Pad for the connection of a Current Sensor
  • ATmega328P with Arduino bootloader
  • Standalone, or with APM / Flip / Flip32+ flight controllers
  • These modifications allow direct connection of two batteries (up to 4S)
  • This hardware takes the hardware mods for this firmware and builds them into an RTF solution.
  • This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod.
  • Two independent power sections with an LED indicator on each.
  • Solder jumpers for combining the power sections
  • Solder jumper for PAL video option
  • +5V 500mA regulator for up to +12V supply input
  • Exposed test points for HSYNC and LOS ATmega328P with Arduino bootloader.
  • Dimension: 16 x 16mm

Landing Gear

₹500.00 inc. GST
  • Colour: black
  • Material: ABS Plastic
  • Length: 200mm
  • Ground Clearance:200 mm
  • Compatibility: Q450 and S500 Frames
  • Good-Quality Landing Gears
  • Skidproof landing gears
  • Dimensions : 10 x 8 x 4 cm
  • Weight:230gm
 

Power Distribution Board

₹230.00 inc. GST
  • Material: glass fiber
  • Easy connections from the battery to your ESC, video Transmitter, Flight Controller,
  • LED power indicators  
  • Switches to control LEDs, video Transmitter power, etc.
  • Can connect 1-8 ESC.
  • Onboard switching voltage regulator
  • Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
  • Dimensions : 50 x 50 x 2 mm.
  • Weight: 8 gm.