Mini OSD W/ KV Team MOD For Racing F3 Naze32 Flight Controller RC Drone

₹850.00 inc. GST
  • NO DC/DC converter, hence less heating
  • FTDI cable compatible pinout
  • Standard 6-pin ISP header
  • Two LED indicators
  • ATmega328P with Arduino bootloader
  • MAX7456 monochrome on-screen display
  • Pad for an Analog or Digital PWM RSSI signal
  • Pad for the connection of a Current Sensor
  • ATmega328P with Arduino bootloader
  • Standalone, or with APM / Flip / Flip32+ flight controllers
  • These modifications allow direct connection of two batteries (up to 4S)
  • This hardware takes the hardware mods for this firmware and builds them into an RTF solution.
  • This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod.
  • Two independent power sections with an LED indicator on each.
  • Solder jumpers for combining the power sections
  • Solder jumper for PAL video option
  • +5V 500mA regulator for up to +12V supply input
  • Exposed test points for HSYNC and LOS ATmega328P with Arduino bootloader.
  • Dimension: 16 x 16mm

Motor for Micro FPV RC Quadcopter

₹150.00 inc. GST
  • Motor Diameter: 8.5mm
  • Motor Length: 20mm
  • Shaft Diameter: 1.0mm
  • Cable Length: 60mm
  • Weight: about 5g
  • Operating Voltage range: 3v to 3.7v DC
  • Rated Speed - 39000 RPM
  • Propeller length: 75mm
  • This coreless motor supports 1S battery.
  • Ideal for mini quadcopter projects weighing below 60 grams

MR.RC 12A ESC

₹749.00 inc. GST
  • Input Voltage: 2-3S LIPO
  • Working Current: 12A
  • Burst current (10S): 15A
  • BEC: 5V / 1A Programmable: Yes
  • With stable performance, it is practical and durable
  • Offer you high compatibility, reliability, and stability
  • Throttle range can be set to be compatible with different receivers.
  • Equipped with built-in linear BEC or switch BEC.
  • Easy to install and convenient to use
  • Play a significant role in driving and controlling the motor to complete all kinds of instructions
  • Suitable for 250 Mini four-axis and F330 aircraft, etc
  • Max speed: 210,000 rpm for 2-pole, 70,000 rpm for 6-pole, 35,000 rpm for 12-pole.
  • Dimensions:38 x 20 x 6 mm
  • Weight: 30g

Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot

₹12,000.00 inc. GST
  • The advanced 32-bit ARM CortexM4 high-performance processors; can run NuttX RTOS real-time operating system.
  • 14 PWM / servo output.
  • Bus interface (UART, I2C, SPI, CAN).
  • The integrated backup power and backup controller fails; the primary controller fails over to the backup control is safe.
  • Provide automatic and manual modes.
  • Provide redundant power input and failover.
  • Multicolor LED lights.
  • Provide a multi-tone buzzer Interface.
  • Micro SD card to record flight data.
Processor:
  • 32bit STM32F427 Cortex M4 core with FPU.
  • 32-bit STM32F103 failsafe co-processor.
  • 168 MHz.
  • 128 KB RAM.
  • 2 MB Flash.
Sensors:
  • ST Micro L3GD20H 16 bit gyroscope.
  • ST Micro X4HBA 303H 14-bit accelerometer/magnetometer.
  • Invensense MPU 6000 3-axis accelerometer/gyroscope.
  • MEAS MS5607 barometer.
Interfaces:
  • 5* UART, 1*compatible high voltage, 2*hardware flow control
  • 2*CAN
  • Spektrum DSM/DSM2/DSM-X satellite receiver compatible input
  • Futaba SBUS compatible input and output
  • PPM signal input
  • RSSI (PWM or voltage) input
  • I2C
  • SPI
  • 3.3 and 6.6VADC
  • input External USB MICRO interface
  • Color:Black
  • Size: 50x81x16mm

Power Distribution Board

₹250.00 inc. GST
  • Material: glass fiber
  • Easy connections from the battery to your ESC, video Transmitter, Flight Controller,
  • LED power indicators  
  • Switches to control LEDs, video Transmitter power, etc.
  • Can connect 1-8 ESC.
  • Onboard switching voltage regulator
  • Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
  • Dimensions : 50 x 50 x 2 mm.
  • Weight: 8 gm.

Q330 Quadcopter Frame

₹1,049.00 inc. GST
  • Colour: Black & Red
  • Wheelbase: 325mm
  • Frame Diameter: 330mm
  • Frame Spacing: 30mm
  • Recommend to use 3S 2200-4000mah Lipo battery
  • Glass fibre material on centre plates
  • Glass-filled nylon arms for increased strength and durability
  • Lightweight arm design
  • Integrated PDB for easy wiring and tidy installation
  • Increased internal space for additional electronics/equipment
  • Additional mounting holes for frame upgrades
  • Suitable for CC3D\MWC\APM\PIXHAWK\NAZA flight control
  • Recommend to use 2204/2205 + 6045propeller + 12A ESC, violate flying recommend to use 2208 motor + 20A ESC + 8045 propeller
  • Dimension: 21.5*10.5*5cm
  • Weight: 231g

QAV250 Quad-copter Frame

₹1,400.00 inc. GST
  • Item name: QAV250 Frame Kit
  • Arm plate thickness: 3mm
  • Main material: 3k carbon fibre
  • Wheelbase: 250mm
  • The arm equips dampers for a safe landing.
  • The arm has multiple motor mounting holes.
  • Equips vibration-free mounting bracket for FPV camera.
  • Recommend Propeller: 5 inch
  • Recommend Motor: 1806 2204 2206
  • Recommend ESC: 8A-12A
  • Recommend Battery: 1300Mah-2200Mah

Simonk ESC 30A

₹550.00 inc. GST
  • Standard 30A BLDC ESC Electronic speed controller
  • Input voltage: DC 6V-16.8V(2-4S Lixx)
  • BEC: 5V 2amp
  • Easy handling and good compatibility
  • Suitable Batteries: 2-3S LiPo.
  • Application: BLDC Motors, Multirotor, RC Planes et
  • Running current: 30A (Output: Continuous 30A, Burst 40A up to 10 Secs.)
  • Size: 36* 26* 7mm
  • Weight: 32g