I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
5V 20Amp SMPS Power Supply
₹1,200.00 Original price was: ₹1,200.00.₹1,000.00Current price is: ₹1,000.00. inc. GST
- Input Voltage: AC 100 – 264V 50 / 60Hz
- Output Voltage: 5V DC, 20A
- Output voltage: Adjustment Eange: ±20%
- Protections: Overload / Over Voltage / Short Circuit
- Auto-Recovery After Protection
- Universal AC input / Full range
- 100% Full Load Burn-in Test
- Cooling by Free Air Convection
- High Quality and High Performance
- LED power supply with a metal body for hidden installation for LED lighting
- Design with Built-in EMI Filter, improve signal precision.
- Certifications: CE & RoHs
- No Minimum Load.
- Compact Size Light Weight.
- High Efficiency, Reliabiltiy & low energy consumption
- Category – Switch Mode Power Adaptor (SMPS)
- MTBF >50,000 hours
- Output Type – DC
- Output – 5Volts 20Amp
- Shell Material: Metal Case / Aluminum Base
- Color: Sliver
A switched-mode power supply (SMPS) is an electronic circuit that converts power utilizing switching devices that are turned on and off at high frequencies, as well as storage components like inductors or capacitors to provide power while the switching device is not conducting.
An SMPS, like other power supplies, converts the voltage and current characteristics while transferring power from a DC or AC source (typically mains power) to DC loads, such as a personal computer. Unlike a linear power supply, a switching-mode supply’s pass transistor alternates between low-dissipation, full-on and full-off states all the time, spending relatively little time in the high-dissipation transitions, reducing wasted energy.
This is a 100W DC metal power supply with a 5V 20A SMPS. It works well and produces only a small amount of heat. Its consistent voltage output assures power supply stability. Overvoltage, short circuit, and overload protection are all included in the switching power supply. The anti-interference mechanism ensures that LED bulbs last a long period. Changing the power supply

Related products
5V USB OUTPUT CONVERTOR 7V-24V TO 5V/3A, DC-DC STEP DOWN BUCK KIS3R33S MODULE
- Module nature: non isolated buck
- Input voltage: 7V-24V DC
- Output voltage: 5V DC
- Output current: 4A
- Conversion efficiency:96% (max)
- Switching frequency: 340KHz
- Output ripple:30mv (max)
- Load regulation: +/-0.5%
- Voltage regulation: +/-2.5%
- Operating temperature: -40 degree to +85 degree Celsius
- Rectification: nonsynchronous rectification
- Short circuit protection
- Dimensions:60*21*14mm
- Weight: 150gm
DC –DC 600W 10-60V TO 12-80V BOOST CONVERTOR STEP UP MODULE POWER
- Input voltage: 12v-60v
- Output voltage: 12v-80v (adjustable)
- Input current: maximum input current 15A
- Output current: maximum output current 10A
- Output power: effective power input voltage*10A
- 600-watt high power booster module
- Operating frequency: 15KHz
- Overcurrent protection
- Minimum voltage difference: 2v
- Ultra-low dropout voltage
- Conversion efficiency: 95%
- Short circuit protection
- dimension:76*60*56mm
- weight: 250 gm
DPS3003 Constant Voltage Current Step-down Programmable Power Supply Module
- Input voltage range: 6V to 40V
- Output voltage range: 0V to 32V
- Output current: 0 to 3.000A.
- Output power range: 0-96W.
- Open size: 71mm*39mm.
- Output voltage resolution: 0.01V.
- Output current resolution: 0.001A.
- Output Voltage accuracy: ± (0.5% + 1 digits)
- Output Current accuracy: ± (0.5% + 2 digit)
- Dimension: 79*43*41mm
- Weight: about 90g.
Hi-link HLK-5M03 100-240 VAC to 5 VDC/3W Power Supply Module
- Meet UL, CE requirements,
- Ultra-thin, ultra-small
- Rated input voltage 100-240 VAc
- Input voltage range 90-264 VAc
- Maximum input current: 0.2 A
- Input current surge: 10 A
- Maximum Input voltage: 270 VAc
- Enter slow start:50 mS
- Input Low Voltage Efficiency Vin=110VAc,Output full-load?69 %
- Input High Voltage Efficiency Vin=220VAc,output full-load?70 %
- Long-term reliability: MTBF 100000h
- Load rated output voltage: +5±0.1
- Full rated output voltage: 5±0.2 VDc
- Short-term maximum output current: 1000mA
- The maximum output current for a long time: 600mA
- Voltage Regulation ±0.2 %
- Load Regulation ±0.5 %
- Low ripple and low noise
- Output overload and short circuit protection
- High efficiency, high power density
- Product designed to meet the requirements of EMC and Safety Test
- Low power consumption, environmental protection, no-load loss <0.1W
LM2596 3A STEP DOWN MODULE
- Module properties: non isolated constant voltage module
- Rectification : non synchronous rectification
- Input voltage: 4.5V-35V
- Output voltage: 1.3V-30V
- Output current: 3A maximum
- Conversion efficiency: 92%
- Switching frequency: 150KHz
- Output ripple: 50mV 20M bandwidth
- Load regulation: +/- 0.5%
- Voltage regulation:” +/-2.5%
- Operating temperature: -40 degree to 85 degree Celsius
- Dimension: 48*23*14mm
Mini 360 STEP DOWN BUCK CONVERTER POWER MODULE
- MPS MP2307DN buck regulator IC
- Design Non-isolated buck
- Rectification: synchronous rectification
- Input voltage: 4.75V-23V
- Output voltage: 1.0V-17V
- Output current Peak: 3A, continuous 1.8A
- Conversion efficiency: 96%
- Switching frequency: 340KHz
- Built-in 160°C thermal shutdown
- Output ripple: 30mV (no load)
- Load regulation: ± 0.5%
- Voltage regulation: ± 2.5%
- Operating temperature: -40 ° C to + 85 ° C
- Dimensions: 17 * 11 * 3.8mm
XL4015 5A STEP DOWN MODULE
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 ~ + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator: No
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm
XL4015 5A STEP DOWN WITH HEAT SINK
- Module nature: non-isolated buck module ( BUCK )
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Output current: 0-5A, it is recommended to use within 4.5A
- 14 Digital I/O Pins
- Output power: It is recommended to use within 75W, please add a heat sink if it exceeds 50W
- Working temperature: -40 degree + 85 degrees
- Working frequency: 180KHz
- Conversion efficiency: up to 96% Load adjustment rate: S ( I ) ≤ 0.8%
- Voltage adjustment rate: S ( u ) ≤ 0.8%
- Power indicator
- Short circuit protection
- Over-temperature protection
- Dimension: 54mm * 23mm wide *18mm

Reviews
There are no reviews yet.