Showing 1–12 of 19 results

PICKIT-3 Programmer

₹3,000.00 inc. GST
  • Full-speed USB support using Windows standard drivers
  • Real-time execution
  • Processors run at maximum speeds
  • Built-in over-voltage/short circuit monitor
  • Low voltage to 5V (1.8 to the 5V range)
  • Read/write program and data memory of the microcontroller
  • Diagnostic LEDs (power, active, status)
  • Read/write program and data memory of the microcontroller
  • 1Erase of all memory types (EEPROM, ID, configuration, and program) with verification
  • Peripheral freeze at the breakpoint.
  • Program up to 512K byte flash.

Pic Kit-2 Programmer

₹2,200.00 inc. GST
  • Supported Device Families: PIC10F,PIC112F, PIC16F,PIC18F,PIC24
  • Programs all current 8-, 16-, and 32-bit Flash PIC microcontrollers.
  • Includes the UART Tool and Logic Tool microcontroller development utilities.
  • With a portable USB power source, PICkit 2 will program the downloaded code into a PIC Microcontroller
  • High-quality PCB FR4 Grade with FPT Certified

PICkit 3.5 Compatible Programmer with USB Cable and Jumper Wire- PIC Kit

₹1,900.00 inc. GST
  • Type: Debugger/Programmer
  • Tool/Board Application: Debugging/Programming
  • MCU Supported Families: Flash-based PIC MCUs
  • Core Architecture: PIC, dsPIC
  • IC Product Type: In-Circuit Debugger
  • USB (Full speed 12 Mbits/s interface to host PC)
  • Real-time execution
  • MPLAB IDE compatible
  • Built-in over-voltage/short circuit monitor
  • Firmware upgradeable from PC/web download
  • Supports low voltage to 2.0 volts (2.0v to 6.0v range)
  • Diagnostic LEDs (power, busy, error)
  • Read/write program and data memory of the microcontroller
  • Erase of program memory space with verification
  • Freeze-peripherals at breakpoint
  • Program up to 512K byte flash with the Programmer-to-Go
  • Easy to use Windows-based programming
  • USB Interface
 

Mini St-Link V2 Stlink Emulator Downloader Stm8 Stm32 with Metal Shell

₹950.00 inc. GST
  • Support the full range of STM32 SWD interface debugging, simple interface (including power supply), 4 line speed, stable work; Interface definition shell directly address
  • Support all series STM8 SWIM download debugging (common development environment such as IAR, STVD, etc.) are supported.
  • Support the firmware upgrade automatically, to ensure that the ST company product support. When they leave the firmware has been upgraded to the latest V2. The J17. S4.
  • Increase the 5 v power output, the output it can protect the I/O port, not afraid of error cause damage of ST-LINK V2.
  • Easy interface to use pure copper plating 2.54 spacing horn, with 20 cm Dupont line, can deal with different target board line sequence, flexible connection;
  • Use U disk aluminium alloy shell to protect the mainboard, convenient to carry, not afraid of static electricity, not afraid of tumbling.
  • Material: metal + plastic
  • Colour: Black/Red/Green/Pink/Gold/Grey/Blue/White( Randomly Sent )
  • Power output: 5V
  • simulator: about 5.6*2*0.8cm
  • Debugging line: about 20cm
  • Weight (kg): 0.012

AVR ISP 10 Pin to 6 Pin Adapter Board

₹175.00 inc. GST
  • Made of high-quality material, practical and durable
  • No. of Pinon USBASP side: 10.
  • Connector type on USBASP side: Male.
  • No. of Pinon Device under the programming side: 6.
  • Connector type on Device under the programming side: Female.
  • Header Pin Pitch: 2.54mm (0.1in).

USB AVR ISP 10 Pin Programmer | ATmega8 USB Programmer

₹300.00 inc. GST
  • Allows you to read or write the microcontroller EEPROM, firmware, fuse bits and lock bits
  • Support for Linux, Mac OS X and Windows XP,7,8
  • 5 KB/sec maximum write speed
  • Software controlled SCK option to support targets with low clock speed (< 1.5MHz)
  • 10 pin ISP interface
  • Works under multiple platforms. Linux, Mac OS X and Windows are tested.
  • Software controlled SCK option to support targets with low clock speed (less than 1.5MHz).
  • 6 Pin Adapter board along with the programmer for Standard ISP connections.
  • B-type USB Connector for power.
  • Separate Two Different leds for power & programmer status.

TL866CS USB Universal Programmer EEPROM FLASH 9 Adapters Extractor for 13000 Ics

₹5,000.00 inc. GST
  • Model: TL866CS
  • With a Multi-functional ICSP interface
  • 40pin ZIF socket, fully automatic, support fast mode SPI
  • USB interface for both data transfer and power supply
  • With over-voltage and over current protection
  • Supports the serial number of the chips two times development, built-in a variety of commonly used automatic numbering functions
  • English Language Support
  • It can program faster than another programmer 500%~1000%
  • Programming EPROM, EEPROM, FLASH, SPI, I2C,93Cxx, ICSP etc.
  • Supports thousands of most popular application devices (13071+)r
  • Ideally suits the portable/convenient applications, which includes: car automotive field ECU chip tuning, airbag reset, mileage, satellite devices, BIOS refreshing, Xbox, Wii gaming machines EPROM sync, PIC / MCU development, newer laptop technology and newer desktop PC etc.
  • Dimensions: 4.02 in x 2.48 in x 1.22 in (10.2 cm x 6.3 cm x 3.1 cm)
  • Weight: 138 g

PICKIT2 Microcontroller USB Programmer PIC KIT2 Burner

₹1,750.00 inc. GST
  • Supported Device Families: PIC10F,PIC112F, PIC16F,PIC18F,PIC24
  • Programs all current 8-, 16-, and 32-bit Flash PIC microcontrollers.
  • Includes the UART Tool and Logic Tool microcontroller development utilities.
  • With a portable USB power source, PICkit 2 will program the downloaded code into a PIC Microcontroller
  • High-quality PCB FR4 Grade with FPT Certified

STC Automatic Programmer USB – TTL 5V 3.3V SCM Burning Programmer

₹600.00 inc. GST
  • Supports 3.3V and 5V STC full range of all SCM burning procedures.
  • Highest baud rate 115200
  • Programmer automatically downloads without cold start, no need to frequently power down SCM.
  • 4The burner with USB to TTL, USB to serial port function, can be used for USB to TTL electronic product upgrades, does not affect the normal serial communication debugging
  • The success rate of STC12, STC15, STC11, STC10 series programs can be up to100%.
  • Programmer uses CH340 + SCM control core.
  • With 500MA self-recovery fuse, perfect to protect your computer motherboard!
  • Metal aluminium shell protection burner motherboard.
  • The interface definition is printed on the shell.
  • When burning STC SCM, after clicking download, the light will go out, it will flash when there is data transmission, if no data transmission, it will always keep bright.
  • Support win7 8 10 system (64-bit and 32-bit system)

TL866II Plus Universal USB MiniPro USB Programmer for 15000+IC SPI Flash NAND EEPROM MCU PIC AVR

₹6,000.00 inc. GST
  • High-Speed Programming - 12 Mbps
  • Unique ultra-low power consumption
  • Portable performance
  • Programmable programming power supply
  • Best overvoltage, overcurrent protection
  • 40-pin universal pin
  • Upgrade function
  • 54/74F/LS/HC CMOS4000 series IC functional tests
  • AVR microcontroller one-to-one soft encryption
  • Unified and convenient user interface
  • NAND Flash: Yes
  • ISP for 24/93/25 MCU: Yes
  • 25 NOR Flash Max. Capacity: 512M
  • Multiprogramming: 4 programmers
  • VPP Max. Voltage: 18 V
  • VCC Voltage: 1.8 V to 6.5 V
  • W29C020 P+V (s): 10.S+2.4S
  • W25X80 P+V (s): 9.3S+1.7S
  • W25W64 P+V (s): 69S+14.5S
  • Device List: 15,000+
  • Support simultaneously burn with 4 Programmers each computer
  • Minimum Volume and the lowest Power Consumption and Do not Feel any Heat in Process.
  • All chips do not need an external power supply, the low power consumption of its own to ensure that the USB port can provide enough power.
  • Best internal 40 pins over-voltage protection, the strongest VCC/VPP 4-level overcurrent protection. The short-circuit do not reset the PC.
  • Unique serial ICSP interface
  • Test CMOS4000 74/54 series integrated circuit. Can be located in the gate circuit error.
  • Chip auto serial number is the most complete and practical.

CH341A 24 25 Series EEPROM Flash BIOS USB Programmer with Software & Driver

₹600.00 inc. GST
  • USB interface
  • With CH341A chip
  • Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip
  • With 24/25 status indicator lamp
  • Support USB to TTL conversion
  • Support 24EEPROM and 25 SPI flash 8pin/ 16pin chip
  • Recognize 25 series chip automatically
  • Supports download STC series procedure of single chip
  • SPI pin to support expanding the utility
  • STC microcontroller supports a full range of program download
  • Support expanding the utility by SPI pin
  • With SOP8 SOP16 to DIP8 converter board
  • Used in wide applications – PC motherboard, LCD monitor, DVD, router program reading and writing
  • Supports Windows XP, Vista, Win7 and Win8 (32/64bit) system
  • Provide 5V-3.3V power supply output

AVR-ISP 10Pin to 6pin Adapter PCB for USBASP Programmer

₹470.00 inc. GST
  • Made of high-quality material, practical and durable
  • Number of Pinon USBASP side: 10.
  • A number of Pinon Device under the programming side: 6.
  • Connector type on USBASP side: Male.
  • Connector type on Device under programming side: Female.
  • Header Pin Pitch: 2.54mm (0.1in).