5V Stepper Motor 28BYJ-48 with ULN2003

₹150.00 inc. GST
  • Rated voltage: 5V DC
  • Reduction Ratio: 64:1
  • Step Angle: 5.625° /64
  • Frequency: 100Hz
  • Self-positioning Torque: >34.3mN.m
  • No of phase: 4
  • Speed variation ratio: 1/64
  • Pull-in torque: 300 gf.cm
  • Friction torque: 600-1200 gf.cm
  • DC resistance: 50Ω±7% (25°C)
  • Insulated resistance: >10MΩ (500V)
  • Insulated power: 600VAC/1mA/1s
  • Rise in Temperature <40K(120Hz
  • Noise <35dB(120Hz,No load,10cm
  • Stepper motor with a standard interface, when used directly pluggable.
  • Four-phase LED indicator which indicates the status of the stepper motor work.
  • Compact size stepper motor perfect for small robotics applications.

5V-12V DC Brushless Motor Driver Board Controller

₹1,999.00 inc. GST
  • Type: Voltage Regulator
  • Drive voltage: DC 5-l2V
  • Work current: ≤ 1.2A
  • Speed range: from 0% to 100%
  • Phase inversion Control
  • Offers Voltage polarity protection and Overcurrent Protection
  • Suitable for hard brushless motor, brushless motor drive and other miniature 3 / 4 wire brushless motor without hall

6V 12V 24V 8A PWM DC Motor Speed Controller CCM5D Digital Display LED Motor Controller Speed Regulator

₹600.00 inc. GST
  • Input Supply Voltage: 6V-30VDC
  • Continuous Current (A): Rated current 5A (8A MAX, cannot be prolonged)
  • Maximum Output Power: 240W
  • LED display the duty ratio: 0-100%
  • PWM Frequency: 16khz
  • Duty Cycle adjustable: 0%-100%
  • Dimensions: 78*42*25mm
  • The display range of 3-digit LED display is "000"-"100".
  • Adjustable speed range is 0%-100%
  • Fine workmanship and good performance.
  • Easy to use.
  • Long service life.
  • Suitable for the DC motor (or DC load) within 5A, Peak current 8A.
  • Incorporate a push key. Push closed, and then push open

A2212 BRUSHLESS DC MOTOR 1000KV

₹600.00 inc. GST
  • Motor KV: 1000
  • Operating voltage: 7.2V to 12V (2 to 3Li-poly or  6to10 NiCad)
  • LiPO Batteries: 2S-3S
  • No-load Current: 10 V: 0.5 A.
  • Current Capacity: 12A/60S
  • Maximum current:13Amp for 60Sec
  • Maximum Watts:150 Watt
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested
  • Minimum ESC Specification: 18A (30A Suggested)
  • Maximum operating temperature: + 80°C
  • Complete speed control because of a three-phase connection.
  • Long-life as there are no moving contact
  • Thrust @ 3S with 1045 propeller: 800gms approx
  • Thrust @ 3S with 0945 propellers: 475gms approx
  • Thrust @ 3S with 0845 propellers: 475gms approx
  • Motor Dimensions: 27.5 x 30mm
  • Weight of motor:50-60 grams
 

A2212 BRUSHLESS DC MOTOR 1400KV

₹550.00 inc. GST
  • Operating voltage: 7.2V to 12V
  • LiPO Batteries: 2S-3S
  • No-load Current: 10 V: 0.5 A.
  • Current Capacity: 12A/60S
  • Maximum current:13Amp for 60Sec
  • Maximum Watts:150 Watt
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested
  • Minimum ESC Specification: 18A (30A Suggested)
  • Maximum operating temperature: + 80°C
  • Complete speed control because of three-phase connection.
  • Long-life as there are no moving contact
  • Thrust @ 3S with 1045 propeller: 1000gms approx.
  • Thrust @ 3S with 0945 propeller: 650gms approx.
  • Thrust @ 3S with 0845 propeller: 550gms approx.
  • Motor Dimensions: 27.5 x 30mm
  • Weight of motor:50-60 grams

A2212 BRUSHLESS DC MOTOR 1800kv BLDC

₹600.00 inc. GST
  • KV: 1800
  • No load Current : 10 V : 0.5 A.
  • Current Capacity: 12A/60s
  • No Load Current @ 10V: 0.5A
  • Of Cells: 2-3 Li-Poly
  • Motor Dimensions: 27.5 x 30mm
  • Shaft Diameter: 934;3.17mm
  • Shaft diameter : 3.175mm.
  • Minimum ESC Specification: 18A (30A Suggested)
  • Thrust @ 3S with 1045 propeller: 1000gms approx
  • Thrust @ 3S with 0945 propeller: 650gms approx
  • Thrust @ 3S with 0845 propeller: 550gms approx

A2212 BRUSHLESS DC MOTOR 2200KV

₹650.00 inc. GST
  • Motor KV: 2200
  • Operating voltage: 7.2V to 12V (2 to 3Li-poly or  6to10 NiCad)
  • LiPO Batteries: 2S-3S
  • No-load Current: 10 V: 0.5 A.
  • Current Capacity: 12A/60S
  • Maximum current:13Amp for 60Sec
  • Maximum Watts:150 Watt
  • Efficiency Current: 4-10A
  • Shaft Diameter: 3.17 mm
  • Prop Adapter is quality tested
  • Minimum ESC Specification: 18A (30A Suggested)
  • Maximum operating temperature: + 80°C
  • Complete speed control because of three phase connection.
  • Long life as there are no moving contact
  • Thrust @ 3S with 1045 propeller: 1000gms approx.
  • Thrust @ 3S with 0945 propeller: 750gms approx.
  • Thrust @ 3S with 0845 propeller: 650gms approx.
  • Motor Dimensions: 27.5 x 30mm
  • Weight of motor:50-60 grams
       

A3967 STEPPER MOTOR DRIVER

₹300.00 inc. GST
  • A3967 precision micro-stepping driver
  • Power supply: 7v to 30v
  • Logic voltage: 5v to 3.3v
  • Higher the voltage higher the torque at high speed
  • Adjustable current control from 150Ma/ phase to 750ma phase
  • Automatic current decay mode detection/selection
  • Fast, slow, and mixed current decay modes
  • Internal UVLO and thermal shutdown circuitry
  • Crossover current protection
  • Micro stepping resolution to full, half, quarter, and eighth steps by broken out MS1 and MS2 pins.
  • Compatible with Arduino, GRBL G-Code interpreter for driving3-axis CNC machines
  • Salington sink drivers used
  • Compactible with 4, 6,8 wire stepper motor of any voltage
 

A4988 Stepper Motor

₹160.00 inc. GST
  • Operating voltage supply: 8 V to 35 V
  • Continuous current per phase: 1 Amp
  • Maximum current per phase: 2 Amp
  • Minimum logic voltage: 3V
  • Maximum logic voltage: 5.5V
  • Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16
  • Logic Voltage supply: 3.3 V to 5 V
  • Compatible with 3V3 and 5V microcontrollers
  • Our Board comes with 0.1 Ohm Sensor resistors
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
  • The Correct current decay mode (fast decay or slow decay) is selected by chopping the control
  • Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
  • Short-to-ground and shorted-load protection
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Exposed solderable ground pad below the driver IC on the bottom of the PCB

A4988 STEPPER MOTOR DRIVE CONTROLLER BOARD

₹250.00 inc. GST
  • Operating voltage supply: 8 V to 35 V
  • Continuous current per phase: 1 Amp
  • Maximum current per phase: 2 Amp
  • Minimum logic voltage: 3V
  • Maximum logic voltage: 5.5V
  • Microstep resolutions: Full, 1/2, 1/4, 1/8, and 1/16
  • Compact size, easy to install and use.
  • All jumpers hit the ON position to indicate 16 subdivisions (4988) or 32 subdivisions (8825).
  • Jm connection motor; Jv Connects 5V and 12V-24V Power Supply.
  • E /S /D /G of Jc corresponds to Enable /Step /Dir /Gnd driving signal output on the connection respectively.

Aluminium Flexible Coupling Coupler Helical Shaft (5 x 5 mm)

₹250.00 inc. GST
  • Material: Aluminium.
  • Bore Diameter d1: 5 mm.
  • Bore Diameter d2: 5 mm.
  • Torsional stiffness: Zero backlash.
  • One piece construction.
  • Corrosion resistance and High Durability
  • One piece construction with long-lasting performance
  • Torsional stiffness: Zero backlash
  • Low moment of inertia offering constant velocity

Aluminum Metal Servo Arm 25T Metal Horns Round Type Disc

₹225.00 inc. GST
  • Material: CNC Aluminium
  • M3 Screws
  • Adjustable type servo arm
  • Mounting Hole Spacing: 14mm
  • Servo disc diameter: 20mm
  • Pinking aperture: 5.5mm
  • Pinking Quantity: 25mm
  • 25Tooth
  • Color:Silver
  • Suitable for Hitec, Parallax, Futaba and other brands (40 × 20 × 36mm) standard servos
  • Weight: 2 gm