IR Obstacle Avoidance Proximity Sensor Module
IR Proximity Module using TSOP
- Operating wavelength: Near-infrared region 700 nm to 1400 nm
- Main Chip: LM358
- Operating Voltage Range: 3.6V-5V DC
- Average Current Consumption: 06mA
- Distance Measuring Range: 2 to 30cm
- Detection angle: 35 °
- Easy to assemble and use
- On-board detection indication
- the effective distance range of 2cm to 80cm
- A pre-set knob to fine-tune distance range
- If there is an obstacle, the indicator lights on the circuit board
- 3mm screw holes for easy mounting
- Dimensions: 48 x 14 x 8mm
- Weight:5gm
IR Receiver 3 Leg Black Small
- Sensing distance: 45m
- P.F frequency: 38.0 kHz
- Supply voltage: 2.5V- 5.5V
- Mounting type: through hole
- Operating temperature: -25°C ~ 85°C (TA)
- Directivity: 45°
- Supply Current: 350µA
- High-Level Pulse Width: 0.8 ms
- Low-Level Pulse Width: 0.8 ms
- Power Dissipation: 10 mW
- Proper Shielding Against EMI
- High Immunity against Ambient Light
- Photo Detector and Preamplifier in single Package
- Low Supply Current
- Insensitive to Noise and Supply Voltage Ripple
IR Receiver Black 3mm
- Spectral range (nm):700-1050
- Light Current IL ≥3mA
- Dark current ID< 0.1uA
- Breakdown Voltage> 30
- Maximum forward current 25mA
- Power dissipation Pd(mw): 100
- Package: Through-hole
- Diameter: 3mm
- Maximum reverse voltage 5V
- Maximum Forward Voltage 2 V-1.3V
- Operating Temperature(Celsius) -40°C- +100°C
- Fast Response
- High photosensitivity
- High reliability
IR Receiver Black 5mm
- Spectral range (nm):700-1050
- Light Current IL ≥3mA
- Dark current ID< 0.1uA
- Breakdown Voltage> 30
- Maximum forward current 25mA
- Power dissipation Pd(MW): 100
- Package: Through-hole
- Diameter: 5mm
- Maximum reverse voltage 5V
- Maximum Forward Voltage 2 V-1.3V
- Operating Temperature(Celsius) -40°C- +100°C
- Fast Response
- High photosensitivity
- High reliability
IR Sensor Array of 8
- 8 IR Sensors with High Range
- Operating voltage: 3.3 to 5V
- Current supply: 100mA
- Output format: 8 digital I/O compatible signal
- Optimal sensing distance: 3 mm.
- Maximum recommended sensing distance: 6 mm
- Distance between each IR Sensor: 15mm
- Analog and Digital Output pins
- Potentiometer to adjust the sensitivity of the individual sensors
- Applications Line Follower Robots Object Array Sensing
- No analogue to digital conversion requires
- Improved sensitivity over voltage-divider analogue output
- Parallel reading of multiple sensors is possible
- Quality FR4 grade PCB for best performance.
- Dimension: 74.93mm x 12.7mm x 3.175mm
IR-08H Infrared Obstacle Avoidance Sensor Module
- Infra-Red IR Emission Receiver IR-08H for Arduino
- Onboard with HS0038B HS38B IR receiver
- Operating Voltage: 3V – 5.5V
- Detection range : 2cm – 40cm
- Output level: Low logic level when an obstacle is detected
- Working current: 20mAh
- Working temperature: -10’C~+50’C
- IO interface: 4 line (-/+/S/EN)
- Output signal: TTL Level
- Adjusting mode: Multi resistance regulation
- Effective angle: 35°
- Size: 4.5 * 1.1cm(approx)
- Easy to assemble and use
- On-board detection indication
- Pin Connection to the board: 4 pins
- A pre-set knob to fine-tune distance range
IRF520 MOSFET DRIVER MODULE SENSOR
- Operating Voltage: 3.3v & 5v
- Digital level port
- Output load voltage: 0-24v
- Output load current: <5A
- The heat sink is added for currently more than 1A
- Compatible with Arduino, MCU, ARM, Raspberry pi
- PWM dimming LED used to step-less dimming, variable-speed motor
- Output PWM can be adjusted by the original IFR520 MOS
- Arduino can drive up to 24V, such as led lights, dc motors, miniature pumps, solenoid valves etc.
- Dimension:34*30*18mm
- Size: 10gm
ISD1760 MODULE (75 sec)
- On-board ISD1760 chip
- Operating voltage: 5v
- 75 sec of audio playback
- Onboard microphone for direct recording
- Frequency: 6KHz or 8KHz
- Recording time: 6K/75 sec, 8K/60 sec
- Output all pin for chip control
- Easy interface with microcontrollers using 2.54mm spaced male pin headers
- High-quality natural voice reduction
- LED status indication
- Long recording time and multiple messages
- Simple operation and better voice quality
- Control not only by buttons but also by SPI from a microcontroller
- Recording, erase, play, FT, fast forward, reset volume buttons
- Dimension: 49*41.5mm
- Weight: 22gm
ISD1820 MODULE (10 SEC)
- Operating voltage: 2.6v to 5v
- Record and playback up to 10 sec
- Push-button and microcontroller controllable AGC circuit added tom increase audio playback volume
- Recording time: 8- 20 sec
- Built-in microphone
- On-chip 8-ohm speaker driver
- High quality, natural voice restored
- Available single-chip control audio recording control mode: the key to control or microcontroller, IO has drawn the line of control
- Can be used as propaganda module
- Auto power down mode
- Duration and sample rate can be extended to 20 sec by varying resistance
- Dimension: 43*34*11mm
