TEMT6000 Ambient Light Sensor
- Adapted to human eye responsivity
- Wide-angle of half sensitivity ϕ = ± 60°
- SMD style package on PCB technology
- Suitable for IR reflow soldering
- Lead-free component
- Package type: surface mount
- High photosensitivity
- Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC
- Dimensions: 4 x 2 x 1.05mm
UV Sensor Module Ml8511 Analog Output UV Sensor Breakout
4-axis Flight Control Sensor HMC5883L BMP085 MWC GY-651
- Model: GY-651
- Use the chip: HMC5883L + BMP085
- Power supply:3-5v (internal low dropout regulator)
- Size: 13.5mm * 15.8mm (pin spacing standard 2.54mm)
- Communication modes: standard IIC communication protocol
- Magnetic field range: ± 1.3 to ± 8.1 gauss
- Pressure range: 300-1100hPa
- Chip 12bit AD converter, 16-bit data output Machine welding process to ensure quality
- Size: 18mmx14mm
MPU-9150 GY-9150 9-Axis Electronic Compass Triaxial Accelerometer Gyroscope Module
- MPU-9150 module (three-axis gyroscope + tri axis accelerometer + axis magnetic field)
- Module Model: GY-9150
- Chip: MPU-9150
- Power supply :3-5v (internal low dropout regulator)
- Communication: IIC communication protocol standard
- 16bit AD converter-chip, 16-bit data output (field 13)
- Gyro Range: ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Magnetic field range: ± 1200uT
- Using Immersion Gold PCB, welding machines to ensure quality
- 54mm pin spacing
GY-88 10 Axis HMC5883L MPU6050 BMP085 IMU Module for Arduino
- MPU 6050 Motion Sensor module: 3-axis gyroscope, 3-axis accelerometer
- HMC5883L module：three-axis magnetic field module
- BMP085 barometer pressure sensor
- Chip: MPU-6050
- Power supply: 3v-5V power
- gyroscope range: + 250 500 1000 2000 °/ s
- Acceleration range: ± 2 ± 4 ± 8 ± 16 g
- HMC5883L range: ± 1.3-8 Gauss
BMP085 9-Axis IMU Magnetic Acceleration Gyroscope Atmospheric Pressure Module
- Nine-axis module (three-axis gyroscope + three-axis acceleration + 3-axis magnetic field + pressure)
- Use chips: L3G4200D + ADXL345 + HMC5883L + BMP085
- Communication: IIC communication protocol (fully compatible with the 3-5v system)
- Mounting hole 3mm
- The power supply: 3-5 v (internal low voltage difference voltage stabilizing)
- Communication: standard IIC communication agreement Chip built-in 16 bit AD converter, 16 bits of data output
- The gyroscope range: + 250 500 1000 2000 °/s
- Acceleration range: ± 2 ± 4 ± 8 ± 16 g
- Standard 2.54mm pin interface, easy breadboard perforated plate experimental connection
- Adopt gold PCB process
- Module size: 25.8mm * 16.8mm
Generic GY-85 BMP085 Sensor Module 9 Axis 6DOF 9DOF IMU Sensor
MMA7455 (MMA7361 MMA7260) Triple Axis Accelerometer Sensor Module
- Low Current Consumption: 400 µA.
- Sleep Mode: 3 µA.
- Low Voltage Operation: 2.2 V – 3.6V.
- Fast Turn-On Time (0.5 ms Enable Response Time).
- Analogue output for each axis.
- +5V operation @1ma current
- Dormancy can make by single-chip IO control;
- Simple to use
- Analogue output for each axis.
- Selectable Sensitivity (+- 1.5g, +- 6g)
- Robust design, high shock survivability
- Low Cost
Raspberry Pi Pico
- Operating Voltage: 1.8-5.5 VDC
- Processor: RP2040 (Dual-core Arm Cortex M0+) By Raspberry Pi
- RAM: 264 KB
- GPIO: 26 Pins
- Clock Speed: 133 MHz
- On-Board Port: Micro-USB 5V/2.5A DC Power Input Port
- 2MB of onboard Flash memory
- The castellated module allows soldering directly to carrier boards
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- Drag-and-drop programming using mass storage over USB
- 26 multi-function GPIO pins
- 2 SPI, 2 I2C, 2 UART, 3 12-bit ADC, 16 controllable PWM channels
- Accurate clock and timer on-chip
- Operating Temperature Range: -20 to 85 degrees C
- Temperature sensor
- Accelerated floating-point libraries on-chip
- 8 Programmable I/O (PIO) state machines for custom peripheral support
BMP 180 Digital Barometric Pressure Sensor
LM358 100 Times Gain Amplification Module Operational Amplifier Module
- On-board LM358 Chip
- 100 times gain circuit design
- On-board LM358 chip
- On-board 10K adjustable resistor, could adjust amplifier times
- On-board power indicator lamp
- All pins lead, directly Input/output signals
- Working voltage: 5V-12V DC
- The chip has led major pin can be directly input and output signals.
- PCB size: 32.7mm x 13.3mm
