Showing 205–216 of 245 results

Speech Recognition Module

₹3,899.00 inc. GST
  • Working voltage: 3.3/5V
  • Local Voice Recognition
  • Very low rate of false triggering
  • Speaker connector(JST2.0, the speaker is not included)
  • Built-in microphone
  • 22 recognition entry
  • Default Baud rate: 9600
  • Flash: 2Mbytes
  • Microphone Sensitivity: -40dB
  • Microphone SNR: 58dB
  • Operating temperature: 0 – 85 degrees C

SPEED MEASUREMENT SENSOR

₹150.00 inc. GST
  • Using imported groove optical coupling sensor, width 5mm.
  • Good signal and waveform
  • The strong driving ability for more than 15mA.
  • Use the LM393 wide voltage comparer.
  • It has the output state light, if the output is high level, the lights are off. If the output is low level, it is on.
  • If it is covered, it will output a high level; otherwise, its output low level.
  • Equipped with a fixed bolt hole, easy install.
  • The DO output interface can be directly connected to a micro-controller IO port if there is a block detection sensor, such as the speed of the motor encoder can detect.
  • DO modules can be connected to the relay, limit switch, and other functions, it can also with the active buzzer module, compose alarm.
 

Square MAX7219 8×8 LED Dot Matrix Display Module

₹350.00 inc. GST
  • Driver Chip: MAX7219
  • Input Voltage: 3.7 to 5.3 V
  • Input Current: 320 mA
  • Display Dimensions: 32x32x6 mm
  • PCD Dimensions: 50×32 mm
  • A single module can drive an 8 * 8 common cathode lattice
  • Requires only 3 communication wires of MCU
  • Cascading multiple Matrix LED Module is very easy
  • The size of the display is very compact
  • The PCB features M3 holes for mounting.

Super Mini Elm327 V2.1 Bluetooth Obd2 OBD-Ii Car Auto Diagnostic Scanner Android

₹950.00 inc. GST
  • Model Name: ELM327 OBD2 Bluetooth
  • Type: code readers & scan tools
  • Output protocol: Bluetooth
  • Material: plastic
  • Voltage: 12V
  • Current: 45mA
  • Wave frequency: 38400Hz
  • Applicable scope: 5-10m / 16.4-32.8ft
  • Item size: 49*26*30mm
  • Support OBDII Protocols: SAE J1850 PWM (41.6 kbaud), SAE J1850 VPW (10.4 kbaud), SAE J1939, J1979

TAP Sensor Module

₹140.00 inc. GST
  • Operating voltage: 3.3V-5V
  • Detect shocks with the spring and send a signal to Controller Board
  • Digital output
  • Dimensions : 12.7 x 10.16 x 10.16 cm
  • Bolt holes for easy installation.

TB6560 4 Axis Stepper Motor Driver

  • Driver Chip: TB6560AHQ
  • Operating Voltage: 10-35V
  • Nominal Voltage: 24V
  • Stepper motor drive current: 1.5A - 3A/phase
  • With the large heat sink to ensure good heat dissipation
  • Double-pole constant flow PWM actuation output
  • 6N137 high-speed OptoCoupler, to ensure a high speed without stepping out.
  • Compatible Stepper motors: 2/4 Phase, 4/6/8 leads stepper motors within 3.5A
  • 1 - 1/16 micro step setting - higher accuracy, smoother operation
  • Full closed-type optical isolation to protect the user's computer and equipment
  • Professional design, two-stage signal processing, super anti-jamming
  • Bipolar constant current chopper drive motor low-speed non-creeping phenomenon, noise, non-resonant region
  • Four input control
  •  

TB6612FNG Dual Motor Driver Module 1A for Arduino/Other Microcontroller

₹200.00 inc. GST
  • Driver Model: TB6612FNG
  • Operating voltage: 2.7 V to 5.5 V
  • Limited Maximum Voltage: 15V max
  • Output current: 1.2A
  • Maximum Current: 3.2A (peak)
  • Number of Channels: 1
  • Standby control to save power
  • CW/CCW/short break/stop motor control modes
  • Built-in thermal shutdown circuit and a low voltage detecting circuit
  • All pins of the TB6612FNG broken out to 0.1 spaced pins
  • Filtering capacitors on both supply lines
  • Dimensions: 30 x 20 x 10mm
  • Weight: 22 gm

TCRT5000 Module

₹175.00 inc. GST
  • Model TCRT5000
  • Chipset LM393
  • Operating Voltage: 3.5-5 VDC
  • Detection distance 1-25mm
  • Operating Current: 15 mA
  • Output Channel 0 or 1
  • Focal Distance: 2.5 mm
  • Designed with a reflected infrared sensor, indicator light.
  • Built-in a potentiometer for sensitivity control.
  • On-board signal output instructions, the output is a highly effective signal at the same time, the indicator lamp light output signal can be directly and single-chip microcomputer IO connection.
  • Signal detection sensitivity can adjust.
  • Reserve all the way more circuits (P3 voltage drawn)
  • Output form: digital switch output (0 and 1)
  • A fixed bolt hole, convenient installation.
  • Dimension:32*11*20mm
  • Weight:22gm

TEA5767 FM Stereo Radio Module

₹750.00 inc. GST
  • Directly plug antenna interface.
  • I2C bus communication.
  • Multi-capacitor combined filter.
  • Blue LED power indicator.
  • High sensitivity(low noise RF input amplifier).
  • High power auto gains control AGC circuit.
  • With reverse polarity protection diode.
  • With a power output filtering sensor.
  • Blue LED power indicator.
  • Onboard 3.5mm audio interface.
  • If connects with a single chip, only connect the Power Ground and two I2C communication cables.
  • LC harmonic oscillator uses a low-cost fixed chip.
  • No need to adjust the Intermediate frequency.
  • High sensitivity(low noise RF input amplifier).
  • High power auto gains control AGC circuit.
  • Soft Mute.3.5mm jack for external Antenna.

TEC1-12705 MODULE

₹300.00 inc. GST
  • Model number: TEC1-12705
  • Operating Voltage: 12V
  • Maximum Voltage- Vmax (V) : 15V
  • Maximum Current- Imax (A) : 5.2A
  • Maximum Power: 54 W
  • Power Cord: 350mm
  • Internal resistance: 1.98 Ohm +/- 10%
  • Life expectancy: 200,000 hours
  • Failure rate based on long-time testing: 0.2%.
  • Easy transition between the hot side to the cool side and vice-versa just by reversing the polarity of the supply.
  • Quality tested cooling cells.
  • Solid-state, vibration-free, noise-free.
  • Simple to install and operate.
  • Should use with a heat sink
  • Temperature: 138°C
  • Wire Insulation Material: Teflon
  • Dimension: 40x40x4.0mm
  • Weight: 29g

TEC1-12706

₹300.00 inc. GST
  • Model number: TEC1-12706
  • Operating Voltage: 12V
  • Maximum Voltage- Vmax (V) : 15V
  • Maximum Current- Imax (A) : 6A
  • Maximum Power: 92 W
  • Power Cord: 200mm
  • Internal resistance: 1.98 Ohm +/- 10%
  • Life expectancy: 200,000 hours
  • Failure rate based on long-time testing: 0.2%.
  • Easy transition between the hot side to the cool side and vice-versa just by reversing the polarity of the supply.
  • Quality tested cooling cells.
  • Solid-state, vibration-free, noise-free.
  • Simple to install and operate.
  • Should use with a heat sink
  • Temperature: 138°C
  • Wire Insulation Material: Teflon
  • Dimension: 40x40x4.0mm
  • Weight: 29g

TF-M16P MICRO SD CARD MODULE

₹300.00 inc. GST
  • Supports MP3 and WAV decoding.
  • Supports a maximum of 32GB micro SD card and 32GB USB flash drive.
  • Supports AD key control mode and UART RS232 serial control mode.
  • 24-bit DAC output
  • Supports dynamic range 90dB and SNR 85dB.
  • Supports FAT16 and FAT32 file systems.
  • Audio files are sorted by folders; supports up to 99 folders, and each folder can be assigned to 255 sound files.
  • Supports inter-cut advertisements.
  • 30 levels adjustable volume, and 6 levels adjustable EQ
  • Built-in 3W amplifier that can directly drive a 3W/8Ohm speaker.
  • Support maximum 3000 audio files under the root directory of the storage device
  • Support random playback.
  • Support maximum of 99 folders, each folder can store 255 audio files
  • Supports playback of specifying folders.